Magni TH 4.19 SP is a telescopic handler.
- Maximum lifting capacity: 4,000 kg
- Maximum lifting height: 18.90 m
- Maximum reach: 14.20 m
Technical specifications
| Maximum lifting capacity | 4,000 kg |
|---|---|
| Maximum lifting height | 18.90 m |
| Maximum reach | 14.20 m |
| Stabilisers – Type | Pivoting |
| Engine – Model | Deutz TCD 3,6 L4 EDG – Stage IIIA / Deutz TCD 3,6 L4 Stage V |
| Engine – Rated power | 74.4 kW (101.2 hp) at 2,200 rpm |
| Engine – Maximum torque | 410 Nm at 1,600 rpm |
| Engine – Displacement | 3.6 l |
| Engine – Cylinders | 4 in line |
| Engine – Engine configuration | Turbocharged direct injection diesel |
| Engine – Cooling system | Water – intercooler |
| Transmission – Type | Hydrostatic |
| Transmission – Maximum pressure | 530 bar |
| Transmission – Gearbox | Dropbox, 2 speeds forward-reverse |
| Axles and brakes – Type | Axles with planetary gearboxes |
| Axles and brakes – Front axle | Oscillating and steering with levelling +/-8° |
| Axles and brakes – Rear axle | Free oscillation |
| Axles and brakes – No. of driving – steering wheels | 4WD – 4WS |
| Axles and brakes – Steering mode | Frontal/Concentric/Crab |
| Axles and brakes – Service brake | Wet multi-disk on front and rear axle |
| Axles and brakes – Parking brake | Hydraulic with negative action on front axle |
| Axles and brakes – Tyre sizes | 445/65 R22.5 |
| Performance – Max. travel speed | 35 km/h |
| Performance – Gradeability (unladen) | 0.57699999999999996 |
| Performance – Turning radius (at forks) | 5,720 mm |
| Weights – Total unladen* | 12,700 kg |
| Tank and system capacities – Diesel fuel | 200 l |
| Tank and system capacities – AdBlue | 10 l |
| Tank and system capacities – Hydraulic fluid | 93 l |
| Tank and system capacities – Engine oil | 9 l |
| Tank and system capacities – Coolant | 20 l |
| Hydraulic circuit for movements – Circuit type | Gear pump |
| Hydraulic circuit for movements – Service pump | Fixed displacement |
| Hydraulic circuit for movements – Max. hydraulic flow rate | 90 l/min |
| Hydraulic circuit for movements – Max. boom head flow rate | 70 l/min (OPT) |
| Hydraulic circuit for movements – Max. operating system pressure | 280 bar |
| Hydraulic circuit for movements – Controls for boom movements | Electro-proportional valve |
| Hydraulic circuit for movements – Movements control | 1 joystick with integrated manoeuvre enable |
| Standards met – 2006/42/EC: EU Machinery Directive | X |
| Standards met – 2016/1628: EU Regulation on the emissions of stage V engines | X |
| Standards met – EN 1459-X: relating to standards on the safety requirements for variable-reach trucks | X |
| Standards met – EN 280-1/EN 280-2: standards relating to mobile elevating work platforms (if available) | – |
| Standards met – ROPS/level 2 FOPS: relating to the standards for protective structures | X |