Magni TH 3.6 is a telescopic handler.
- Maximum lifting capacity: 3,000 kg
- Maximum lifting height: 5.80 m
- Maximum reach: 3.20 m
Technical specifications
| Maximum lifting capacity | 3,000 kg |
|---|---|
| Maximum lifting height | 5.80 m |
| Maximum reach | 3.20 m |
| Stabilisers – Type | – |
| Engine – Model | Deutz TD 2,9 L4 EDG Stage IIIA / Deutz TD 2,9 L4 Stage V |
| Engine – Rated power | 55.4 kW (75.3 hp) at 2,600 rpm |
| Engine – Maximum torque | 260 Nm at 1,600 rpm |
| Engine – Displacement | 2.9 l |
| Engine – Cylinders | 4 in line |
| Engine – Engine configuration | Turbocharged direct injection diesel |
| Engine – Cooling system | Water |
| Transmission – Type | Hydrostatic |
| Transmission – Maximum pressure | 500 bar |
| Transmission – Gearbox | Electronic 2 speeds forward and reverse |
| Axles and brakes – Type | Axles with planetary gearboxes |
| Axles and brakes – Front axle | Steering |
| Axles and brakes – Rear axle | Free oscillation |
| Axles and brakes – No. of driving – steering wheels | 4WD – 4WS |
| Axles and brakes – Steering mode | Frontal/Concentric/Crab |
| Axles and brakes – Service brake | Wet multi-disk on front axle |
| Axles and brakes – Parking brake | Hydraulic with negative action on front axle |
| Axles and brakes – Tyre sizes | 12.0/75 R18 |
| Performance – Max. travel speed | 35 km/h |
| Performance – Gradeability (unladen) | 0.83 |
| Performance – Turning radius (at forks) | 4,060 mm |
| Weights – Total unladen* | 4,850 kg |
| Tank and system capacities – Diesel fuel | 65 l |
| Tank and system capacities – AdBlue | – |
| Tank and system capacities – Hydraulic fluid | 85 l |
| Tank and system capacities – Engine oil | 9 l |
| Tank and system capacities – Coolant | 15 l |
| Hydraulic circuit for movements – Circuit type | Gear pump |
| Hydraulic circuit for movements – Service pump | Fixed displacement |
| Hydraulic circuit for movements – Max. hydraulic flow rate | 87 l/min |
| Hydraulic circuit for movements – Max. boom head flow rate | 75 l/min |
| Hydraulic circuit for movements – Max. operating system pressure | 255 bar |
| Hydraulic circuit for movements – Controls for boom movements | post-compensated electro-proportional valve |
| Hydraulic circuit for movements – Movements control | 1 joystick with integrated manoeuvre enable |
| Standards met – 2006/42/EC: EU Machinery Directive | X |
| Standards met – 2016/1628: EU Regulation on the emissions of stage V engines | X |
| Standards met – EN 1459-X: relating to standards on the safety requirements for variable-reach trucks | X |
| Standards met – EN 280-1/EN 280-2: standards relating to mobile elevating work platforms (if available) | EN 280-1: standards relating to mobile elevating work platforms (if available) |
| Standards met – ROPS/level 2 FOPS: relating to the standards for protective structures | ROPS/level 1 FOPS: relating to the standards for protective structures |