Magni RTH 5.18 is a rotating telescopic handler.
- Maximum lifting capacity: 4,999 kg
- Maximum lifting height: 17.40 m
- Maximum reach: 14.50 m
- Rotation: 360° (continuous)
Technical specifications
| Maximum lifting capacity | 4,999 kg |
|---|---|
| Maximum lifting height | 17.40 m |
| Maximum reach | 14.50 m |
| Rotation | 360° (continuous) |
| Stabilisers – Type | Pivoting |
| Engine – Model | Deutz TCD 3,6 L4 EDG Stage IIIA / Deutz TCD 3,6 L4 HT Stage V |
| Engine – Rated power | 55.4 kW (75.3 hp) at 2,200 rpm |
| Engine – Maximum torque | 390 Nm at 1,300 rpm / 405 Nm at 1,300 rpm |
| Engine – Displacement | 3.6 l |
| Engine – Cylinders | 4 in line |
| Engine – Engine configuration | Turbocharged direct injection diesel |
| Engine – Cooling system | Water – intercooler |
| Transmission – Type | Hydrostatic |
| Transmission – Maximum pressure | 480 bar |
| Transmission – Gearbox | Dropbox, 2 speeds forward-reverse |
| Axles and brakes – Type | Axles with planetary gearboxes |
| Axles and brakes – Front axle | Steering |
| Axles and brakes – Rear axle | Oscillating and steering with hydraulic lock |
| Axles and brakes – No. of driving – steering wheels | 4WD – 4WS |
| Axles and brakes – Steering mode | Frontal/Concentric/Crab |
| Axles and brakes – Service brake | Wet multi-disk on front and rear axle |
| Axles and brakes – Parking brake | Hydraulic with negative action on front axle |
| Axles and brakes – Tyre sizes | 445/65 R19.5 |
| Performance – Max. travel speed | 25 km/h |
| Performance – Gradeability (unladen) | 0.51 |
| Performance – Turning radius (at forks) | 6,050 mm |
| Weights – Total unladen* | 14,400 kg |
| Tank and system capacities – Diesel fuel | 175 l |
| Tank and system capacities – AdBlue | – |
| Tank and system capacities – Hydraulic fluid | 107 l |
| Tank and system capacities – Engine oil | 9 l |
| Tank and system capacities – Coolant | 20 l |
| Hydraulic circuit for movements – Circuit type | Load sensing |
| Hydraulic circuit for movements – Service pump | Variable displacement |
| Hydraulic circuit for movements – Max. hydraulic flow rate | 90 l/min |
| Hydraulic circuit for movements – Max. boom head flow rate | 75 l/min |
| Hydraulic circuit for movements – Max. operating system pressure | 350 bar |
| Hydraulic circuit for movements – Distributor for boom and turret movements | SIL 2 electro-proportional valve |
| Hydraulic circuit for movements – Movements control | Dual joystick with integrated manoeuvre enable |
| Standards met – 2006/42/EC: EU Machinery Directive | X |
| Standards met – 2016/1628: EU Regulation on the emissions of stage V engines | X |
| Standards met – EN 1459-X: relating to standards on the safety requirements for variable-reach trucks | X |
| Standards met – EN 280-1/EN 280-2: standards relating to mobile elevating work platforms (if available) | X |
| Standards met – ROPS/level 2 FOPS: relating to the standards for protective structures | X |
Standard configuration
- “Easy access” system
- Comfort seat
- Adjustable steering column
- Analogue joypad
- Adjustable sunblind
- Heating
- Air conditioning
- FM/AM radio with USB and Bluetooth connectivity
- Ambient LED lights
- USB Type-A and Type-C (5 V) inputs
- Touchscreen, 7”
- MCTS – Magni Combi Touch System on-board software
- Automatic RFID tools recognition system
- LMI – Load Moment Indicator
- LLD – Live Load Diagram
- Onboard and remote integrated diagnostics
- Reversing camera with image integrated in the MCTS
- Q-Fit standard
- Provision for platform
- Advanced three-line CAN BUS system
- Automatic levelling system for outriggers
- Automatic front and rear wheel alignment
- Standard turret rotation motor
- Automatic parking brake
- Mechanical battery cut-off in engine compartment
- Electrical system: 24 V – IP67
- MyMagni by Trackunit connectivity system (Free of charge on request)
- Warranty: 24 months/2,000 hours